UCMDB and UD Practitioners Forum (Previously CMS)
cancel
Showing results for 
Search instead for 
Did you mean: 

DMZ zone discovery

SOLVED
Go to solution
Highlighted
PYALCARI
Regular Collector

DMZ zone discovery

Hello Experts,

 

I have a requirement, which I have to discover the DMZ zone. I am using version 10.10. can anyone suggest me the solution to discover the DMZ zone.

 

Thanks in advance..

 

Regards,

Prasad

3 REPLIES
Hoang_Nguyen_BA
Frequent Visitor
Solution

Re: DMZ zone discovery

Hi Pyalcari,

 

From my understanding, you want to discover servers under DMZ Zone?

Because it is under DMZ Zone so if the ping response is disabled you cannot discover IP addresses of the nodes. In case you have created all IP address CIs manually then everything will be fine.
In addition, there have another way, you can deploy a probe on one of your servers in your DMZ zone. The advantage of putting a probe in the DMZ is that you only need to open up an 8080 or 443 connection both ways between the probe and the UCMDB probe. So you need to open up a small hole in the firewall.

 

Best regards,

Hoang

-------------------------------------------------------------------------------
*HP Support
If you find this or any post resolves your issue, please be sure to mark it as an accepted solution.*
*If you feel the post is helpful, please assign a KUDO star to say "Thanks"*
PuneetS
Frequent Visitor

Re: DMZ zone discovery

Please read the section "Configuring Reverse Proxy" from UCMDB Hardening Guide.

Regards
Puneet

If you find this reply helpful, Click the KUDOS button on the bottom to say 'Thanks'
Rey_L
Frequent Visitor

Re: DMZ zone discovery

Pysalcari,

I agree with Hoang. We deploy a probe in the DMZ and open either 8080 or 443 back to the UCMDB server.
Rey Lejano

effectualsystems.com
//Add this to "OnDomLoad" event