Service Desk Practitioners Forum
cancel

Step ID in SD 4.5 SP18

Highlighted
Maximo 5
Super Contributor.

Step ID in SD 4.5 SP18

Hi

Is possible that when I register two change the server can return ID no consucutive (For example 278 and 280)?

Thanks
8 REPLIES
Ondra Ernyei
Honored Contributor.

Re: Step ID in SD 4.5 SP18

Hi,

the sequence of IDs generated upon the entry registration is stored in the database. Why do you need this ?

Ondra
Michel SILVA SO
Outstanding Contributor.

Re: Step ID in SD 4.5 SP18

Hi Maximo,

Do you mean that the ID 279 has been overlapped?

Rgds,
Michel
Maximo 5
Super Contributor.

Re: Step ID in SD 4.5 SP18

I don't need, its something that it has happened to me. Why?

I don't see nothing in the logserver. I can to see it in logserver?

Thanks
Vasily Kamenev
Acclaimed Contributor.

Re: Step ID in SD 4.5 SP18

HI
This values store in IFC_Sequences, and you can look on what the value after you create the Change.
I use too 18 and does not have the same problem.

Vasily
Michel SILVA SO
Outstanding Contributor.

Re: Step ID in SD 4.5 SP18

This depends on how you configured your Server. Are you creating ID on Form open or on Form Save?

If it is on form open: if someone opens a form and do not chage the ID is incremented but not used because the form has not been saved. To avoid this Administrator Console > System Pannel > General Settings , check ID after creation option.

Hope this helps,
Rgds,
Michel
Maximo 5
Super Contributor.

Re: Step ID in SD 4.5 SP18

I have "ID after creation" configuration
Michel SILVA SO
Outstanding Contributor.

Re: Step ID in SD 4.5 SP18

Then this could be a DB Issue...
Is it overloaded?

Is your ID sequence broken regularly?

Rgds,
Michel
Maximo 5
Super Contributor.

Re: Step ID in SD 4.5 SP18

No ID sequence broken regularly