Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

ilo configuration

Highlighted
application sup
Acclaimed Contributor

ilo configuration

how to configure ilo for ProLiant BL20p G3 server without reboot.The server is located in remote location.

Server ip is 210.214.x.x
gateway : 210.214.4.95
subnet mask: 255.255.255.192

i need to configure ilo ip as 119.227.x.x

thnx in advance
appsupp
1 REPLY
David Claypool
Honored Contributor

Re: ilo configuration

Assuming the host OS has the iLO driver installed (part of the ProLiant Support Pack), and you can connect to a host session (like Terminal Services) on the host, you can use the HPONCFG utility to effect the change.

See http://www.hp.com/go/ilo --> Documentation --> "HP Integrated Lights-Out Management Processor Scripting and Command Line Resource Guide for HP Integrated Lights-Out versions 1.82 and 1.91 and HP Integrated Lights-Out 2 versions 1.1x, 1.2x, 1.3x, 1.70, 1.75, and 1.77" for information on how to do this. Also, http://www.hp.com/go/ilo --> Sample Scripts for downloadable examples including changing iLO network settings. The iLO will actually reboot at the completion of the configuration change, but the host will remain unfazed.
//Add this to "OnDomLoad" event