Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO2 SSL Cert from scratch

SOLVED
Go to solution
Highlighted
Rosseba
Acclaimed Contributor

iLO2 SSL Cert from scratch

Hi.
I've create an SSL cert for iLO2 from scratch, and I signed it with my internal CA.
When I past it in 'Import Certificate' area, iLO2 return me this error:

'The Certificate could not be imported from the supplied X.509 Certificate data.

The Common name on the certificate does not match the DNS name of Integrated Lights-Out. Make sure that the X.509 Certificate data was intended for this Integrated Lights-Out.'

'iLO2 ServerName' is correctly configured (host.domain.dom), but 'iLO 2 Name' contain only the host without domain.

Is there any way to use SSL cert without iLO wizard?

Regards.
3 REPLIES
acartes
Honored Contributor
Solution

Re: iLO2 SSL Cert from scratch

Current iLO firmware uses only the iLO hostname (not the fully qualified domain name) for the certificate subject.
Rosseba
Acclaimed Contributor

Re: iLO2 SSL Cert from scratch

> Current iLO firmware uses only the iLO
> hostname (not the fully qualified domain
> name) for the certificate subject.

acartes,
thank you for your reply.

Regards,
-f
Rosseba
Acclaimed Contributor

Re: iLO2 SSL Cert from scratch

Close thread.
//Add this to "OnDomLoad" event