Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO 2 firmware update has not started

Highlighted
Steven Baillie
Frequent Visitor

iLO 2 firmware update has not started

We have a number of Bl20p G4's that are showing the following in the Administration Tab - ILO 2 Firmware.


iLO 2 firmware update has not started.

 

Does this mean that if the server is ever reseated that the server will fail to power on again.(Read that is may happen due to corrupt ilo firmware)
If it fails to power on again does this mean a new system board or is their a way of fixing it before it fails.


I have found the following about having the blades ilo2 firmware to be maximum version 1.82.

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?=lang=en&cc=us&taskId=120&prodSeriesId=1121598&prodTypeId=3709945&objectID=c02843213&printver=true


I have successfully put the firmware back to V1.82 but the upgrade screen it still saying

iLO 2 firmware update has not started.

thanks


steven

2 REPLIES
Oscar A. Perez
Esteemed Contributor

Re: iLO 2 firmware update has not started

Don't worry about that message. It is normal. 

 

 




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Steven Baillie
Frequent Visitor

Re: iLO 2 firmware update has not started

Is there a way to stop the message "iLO 2 firmware update has not started." from appearing.

 

In the BL p class tab of the ilo and I click on rack view I also get the message "Server is not in a managed enclosure. "

In their a way of stopping this message from appearing and getting the rack view back up.

 

All ilo's are now back to 1.82 or earlier. they were higher.

//Add this to "OnDomLoad" event