Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Using IPMI over ILO2

SOLVED
Go to solution
Highlighted
romain0412
Super Collector

Using IPMI over ILO2

Hi,

I have to monitor some HP Poliant DL380 G6. I've used IPMI protocole on other server (other brand). I wan to use IPMI on ILO2 but I don't find this on the interface.

I've read on an other thread that HP use an another tool, SMASH? I don't know it and don't find how to user it.
4 REPLIES
Oscar A. Perez
Esteemed Contributor
Solution

Re: Using IPMI over ILO2

IPMI support was added in the new iLO2 v2.00 that was just released last week.

iLO2 v2.00 Enhancements/New Features

- New HP Intelligent Power Distribution Unit
- Fully Qualified Domain Name (FQDN) for imported certificates
- A Recovery Payload that will help users recover iLO 2 from a failed firmware upgrade via FTP. Additional details can be found - in the new User Guide which can be found at http://www.hp.com/go/ilo
- "IPMI over LAN" functionality. The IPMI 2.0 RMCP+ (or Linux ipmitool "lanplus") protocol is supported with this release.
- IPMI Serial Over LAN (SOL)
- Data Center Manageability Interface (DCMI) v1.0 specification
- Enhanced the "in band" Intelligent Platform Management Interface (IPMI) to comply with the IPMI specification version 2.0



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
romain0412
Super Collector

Re: Using IPMI over ILO2

Great :-D.

But I search this new firmware but I don't find it. I wan't to upgrade the ILO by web acess, since the operating system is not yet available.

Thanks for your great help.
Oscar A. Perez
Esteemed Contributor

Re: Using IPMI over ILO2


Download Windows Online Component:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1443420321/v60898


Download Windows Online Component 64 bit:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p2023401934/v60896


Download Linux Online Component:
ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1285463034/v60899



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
romain0412
Super Collector

Re: Using IPMI over ILO2

Thanks,

I will try it !
//Add this to "OnDomLoad" event