Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Turn off snmp service or change default snmp community setting

SOLVED
Go to solution
Highlighted
Ben Hochstedler
Acclaimed Contributor

Turn off snmp service or change default snmp community setting

Is it possible to turn off the snmp service in iLO or at least change the default community setting for read-only requests from "public" to something else?
2 REPLIES
barnett chan
Frequent Visitor
Solution

Re: Turn off snmp service or change default snmp community setting

In 1.55 firmware, there is an option in the "snmp/insight manager setting", to disable snmp pass-thru. It is under the Admninistration tab.

You can change the community string within the OS. For windows/netware it is the snmp services. For Linux it is the snmp.conf file.
Ben Hochstedler
Acclaimed Contributor

Re: Turn off snmp service or change default snmp community setting

Thanks for the tip. It appears that even without the new iLO firmware, SNMP requests are being forwarded from iLO to the host, and therefore, the SNMP settings on the host were what matters. All I had to do was to delete the read-only entry for public and set it to only respond to one host: 127.0.0.1.
//Add this to "OnDomLoad" event