The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

SmartStart Scripting Toolkit & ILO

SOLVED
Go to solution
Highlighted
Matt Bance_1
Occasional Advisor

SmartStart Scripting Toolkit & ILO

When i last use RILO to deploy servers you set a RILO to "ALways BOOT" to the virtual Floppy and used the VFLOP DOS command to stop.

However it doesn;t look like this functionality has moved into the ILO's

How can i script stopping the server from booting into the virtual media?

Regards
2 REPLIES
David Claypool
Honored Contributor
Solution

Re: SmartStart Scripting Toolkit & ILO

iLO didn't have enough memory available to have it store an entire floppy on board as did the RILOE and RILOE II. iLO introduced a different concept which was an interactive connection with a device over the browser. In other words, when you were connected to iLO you could pop up Virtual Media and establish a connection from an actual floppy or a floppy image residing on your client system. When you disconnected from iLO, the virtual floppy was disconnected also. In other words, you couldn't load a floppy image into iLO and leave it there, flagging it to be bootable or not bootable.

Having programmatic access (as opposed to interactive) to a floppy was a desirable feature, so in iLO firmware 1.6 there is a new capability to script a connection to a floppy image hosted on an HTTP server like IIS or Apache. Check the latest docs on iLO Advanced at http://www.hp.com/servers/manage --> iLO
Matt Bance_1
Occasional Advisor

Re: SmartStart Scripting Toolkit & ILO

Thanks.
//Add this to "OnDomLoad" event