The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

RILOE in a Proliant 8500

Highlighted
BARRY PETZOLD
Super Collector

RILOE in a Proliant 8500

I have a proliant 8500 and im trying to install a riloe into it.

I have put the board in PCI slot 9 and connected external power to it.

When the machine boots up, the riloe doesnt come up. (the f8 prompt never appears, and I tried running the firmware update but it says it cannot communicate with the board)

Anyone have any ideas?? Ive already tried another riloe.
26 REPLIES
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

Its supposed to go in slot 9, which I tried. I also tried slot 1 and 3 just for the heck of it.
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

What about the cable?
Oleg Koroz
Regular Collector

Re: RILOE in a Proliant 8500

BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

Is there an internal cable that needs to be hooked up?

I cannot find any info in the Proliant 8500 documentation on where a cable would connect to.
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Check the matrix in the pdf. Pg 2-6 (32 of 208)
Were there no cables with the RILOE card?

SRH
Oleg Koroz
Regular Collector

Re: RILOE in a Proliant 8500

BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

It says to use the virtual power button cable, which I havent hooked up.

I dont think this would cause the card not to show up during the post. The F8 prompt never appears.
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Check Pg 7-8 (142 of 208) and compare the led status on RIB.

SRH
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

I got it working. I put the riloe into another server and updated the firmware.

After that, i put it back into the proliant 8500 and it worked!!

Now, my next question... where the heck does the Virtual Power Button Cable go?? I cannot find any refernece to it in the proliant 8500 documentation.
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Glad it worked.

This is more descriptive:
http://www.miscity.net/oars/HW/COMM/REMOTE/RIB_LIGHTS-OUT/resources.html

In the section:
Install Guide -> Remote Insight Lights Out Edition - Virtual Power Button for the ProLiant 8500 -> 192123-001 (PDF) 1926 KB OARS CDROM ...

Click 192123-001(Hyperlink) and press cancel,it'll open the pdf.

SRH
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

Thanks for that info!!

Can you access that pdf? After I hit cancel, it times out and I cannot get to the pdf.

Could you email it to me? Ive tried 2 machines here and cant get it.
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Whats your email address?

SRH
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

barry.petzold at gmail.com
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Sent,hope it's useful.
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

Got it, thanks!! Ill give it a try this weekend.
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

Actually, Im going to beed to buy that cable/kit.

Any ideas on where to find part # "192123-001"?
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

As per http://h18000.www1.hp.com/products/servers/management/remote-lightsout/server-slot-matrix.html
depending on the processor speed,you can use either a
P/N 195254-B21 (split 4-pin cable) available as a spare kit P/N 195724-001 OR
P/N 160011-001 (4-pin cable) ships with RILOE kit.

If you don't have a cable shipped with the RILOE kit,then its a 195724-001 part.

Order from
http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=partinfo&template=main&cpric=&psrchmode=&partsrch=195724-001&submit.x=0&submit.y=0

SRH
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

According to the PDF you sent me, I need the "Three-segment virtual power button calbe for the Compaq ProLiant 8500 server".

That cable didnt come with the rolie, and i cant find that specific part number.
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

I found the part # that I need - 192123-001

Called hp adn tried to order it. They said that serer is retired, and so are all the parts.

Anyone have any ideas on where to find that cable?
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Barry,not too sure hoe you found 192123-001 to be the right part number?
It seems to be the Pdf(which i mailed to you) document number(see attahced file).
Check the picture of the cable in the partsurfer link which i gave earlier,it seems to be the one.

SRH
sandeep_raman
Esteemed Contributor

Re: RILOE in a Proliant 8500

Oops attachment ..
BARRY PETZOLD
Super Collector

Re: RILOE in a Proliant 8500

I just ordered that part... $12. Hopefully it works!!!

Thanks a ton for your help. Ill let you know how it worked out.
//Add this to "OnDomLoad" event