Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

RILOE II errors after firmware upgrade to 1.20

Highlighted
saserver
Acclaimed Contributor

RILOE II errors after firmware upgrade to 1.20

From the RILOE II host server HP System Mgmt,
it is reported that the NVRAM Write/Read/Verify failed the self test.

Beside that, the event log for the host server also reported RILOE II error '256' , SNMP Trap :9005 in CPQSM2.MIB.

The firmware version currently use is version 1.20 and with this attachment are the screen captures for the error.
2 REPLIES
acartes
Honored Contributor

Re: RILOE II errors after firmware upgrade to 1.20

This problem and solution is discussed in another thread, here:
http://forums1.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1006583

I believe it is a one-time upgrade hiccup that has had an advisory issued in the past. It can be cleared by resetting the RILOE board from the sysem management home page.
Oscar A. Perez
Esteemed Contributor

Re: RILOE II errors after firmware upgrade to 1.20

There is a customer advisory explaining this error but for the RILOE-1 card:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_ES040421_CW01

Looks like this is a one time error because something changed in the NVRAM between versions. Try resetting the RILOE-II card and let us know if you still get the error.



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
//Add this to "OnDomLoad" event