Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

RILO2 Board in DL380G2 will not Boot from virtuell CD

Highlighted
Hense, Klaus
Regular Collector

RILO2 Board in DL380G2 will not Boot from virtuell CD

I have DL380G2 Servers with RILO2 Boards. I Can not boot from the virtuell CD (Smartstart). Booting from Floppy is OK.
All Bios and Firmware are new.

Is this a Failure or is it not supportet?
klhe
2 REPLIES
acartes
Honored Contributor

Re: RILO2 Board in DL380G2 will not Boot from virtuell CD

Verify that you have the 30-pin RILOE II cable properly installed. This carries the signals that enable virtual CD.

Re: RILO2 Board in DL380G2 will not Boot from virtuell CD

Acartes,
look at thread with the same name ;-)
//Add this to "OnDomLoad" event