The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

No PCI-E information in iLO Device Inventory

Highlighted
ReneSchell
Acclaimed Contributor

No PCI-E information in iLO Device Inventory

Hi there,

as you can see in the attached image, there aren't any information about the storage controller for the IO Accelerators PCI-E cards.

What do we need to do to get these information?

1 REPLY
Oscar A. Perez
Esteemed Contributor

Re: No PCI-E information in iLO Device Inventory

iLO4 gets the server hardware Inventory from the System ROM and this exchange of data only happens during POST.  Be sure the server is powered ON and POST has completed (server has already booted to the OS).

Also, most devices require the Agentless Management Service (HP AMS) to be running on the OS side, in order for iLO4 to monitor their status. Refer to this document for more information:

https://www.hpe.com/h20195/v2/getpdf.aspx/4AA6-6053ENW.pdf?ver=1.0

 

 




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
//Add this to "OnDomLoad" event