The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
The community will be in read-only from Tuesday 11:59pm (PST) to Wednesday 7:30am (PST)
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370G1 did not recognise RILOE Card

Highlighted
HeroHari
Occasional Advisor

ML370G1 did not recognise RILOE Card

Hi, I tired installing a new RILOE II card into a ML370G1 today and the server did not pick it up. The card had power as the keyboard worked through the adapter but I had to use the onboard monitor rather than the one in the card. I tried both PCI slots and tried another RILOE card, but still no good.

Has anyone else had issues with ML370G1s?

Thanks
2 REPLIES

Re: ML370G1 did not recognise RILOE Card

REFERENCES
RILOE-II whitepapers and user guides http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=397204

In particular
1.RILOE-II user guide http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00211914/c00211914.pdf
Refer Page 174 - Server PCI Slot and Cable Matrix

2.HP Remote Insight Lights-Out II Hardware Installation and
Configuration Instructions
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00600301/c00600301.pdf
HP_Sammy
Occasional Contributor

Re: ML370G1 did not recognise RILOE Card

Hello HeroHari,

Please check the support matrix for RILOE Card below and in case of ML370G it has to be installed in PCI slots 1 or 2

http://h18013.www1.hp.com/products/servers/management/riloe2/server-slot-matrix.html

And if u r following the matrix then try a know a good pci card other than the one u have tried may be a nic card then it is possible that pci slot have some issue.

hopes this help


Thanks Regards
Sammy :)
//Add this to "OnDomLoad" event