Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO3 Health Status reports OK when Drive has Failed

Highlighted
Rob Leadbeater
Collector

ILO3 Health Status reports OK when Drive has Failed

Hi,

 

We've got a number of ProLiant DL380 G7 servers currently running ILO3 fw 1.28.

 

We've noticed on a handful now, that the System Health status is reported as OK, as is the overall Drives status, even when there's a Faulty drive in the server.

 

I've been through the release notes for the later versions of the ILO3 firmware, but can't see this mentioned in any of the issues or fixes.

 

We're relying on the Health status from the ILO to drive our monitoring, as these particular servers are running appliances that we can't install any OS agents on, so can anyone confirm if this is a known issue or whether it is actually fixed in a later firmware release ?

 

Regards,

 

Rob

3 REPLIES
Rob Leadbeater
Collector

Re: ILO3 Health Status reports OK when Drive has Failed

Screenshots attached...

Oscar A. Perez
Esteemed Contributor

Re: ILO3 Health Status reports OK when Drive has Failed

Can you please log a case with HP support and then PM me the case number?




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Rob Leadbeater
Collector

Re: ILO3 Health Status reports OK when Drive has Failed

It looks like this is an issue with the 1.28 firmware.

 

Although not specifically mentioned in the release notes (that I could see), the Health Status is reported as Critical after ugprading to the 1.50 firmware.

//Add this to "OnDomLoad" event