Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

ILO not responding after reset network settings

Highlighted
Cees_3
Occasional Contributor

ILO not responding after reset network settings

Hi all,

I have a server in a remote location and ILO (integrated ILO on Proliant DL380 G3) was not used. Now I want to use ILO, so I let the network port patched. Because I didn't knew any settings of ILO I used HPONCFG to reset the password, reset the whole ILO board, and set the IP settings to a fixed IP address. Then I rebooted ILO and rebooted the server as well. When I used HPONCFG to GET the IP address info, I see the settings are correct. But I still cannot ping the ILO board, or connect via HP Management in Windows. Is there something I forgot? Thanks in advance for your reaction.

Kind regards,
Cees
1 REPLY
Cees_3
Occasional Contributor

Re: ILO not responding after reset network settings

Just forgot, I also installed HP management pack 7.30 and the newest bios version on ILO.
//Add this to "OnDomLoad" event