Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel

ILO Network_setting trouble

Highlighted
NacJ
Contributor.

ILO Network_setting trouble

I'm Traying to use HPoncfg to bring back my ILO network interface
Here is the command line I performed and the result:
C:\ILO Tools>hponcfg /f Mod_Network_settings.xml /l log.txt
No RILOE II board found.
Firmware Revision = 1.840000 Device type = ILO Driver name = cpqci
Script succeeded

And the here is my script mod_network_settings.xml:


























































So after doing this the interface still not responding, when I performed a ping 174.19.0.18, and the changes were not made even if everythig seems to be OK in log file:

Log.txt:



STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>
Scripting utility should be updated to the latest version.




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>




STATUS="0x0000"
MESSAGE='No error'
/>


Do you have any ideas why the changes were not made?
Thank you
3 REPLIES
Oscar A. Perez
Outstanding Contributor.

Re: ILO Network_setting trouble

You still have DHCP enabled for IP and Gateway. Change those lines to:











__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
NacJ
Contributor.

Re: ILO Network_setting trouble

Yes it Works.
Thak you so much.
NacJ
Contributor.

Re: ILO Network_setting trouble

Solution found