Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel

How to reset ILO

Highlighted
krishnakanth
Contributor.

How to reset ILO

Hi all...

I am able to ping ILO interface. But i am not able to do SSH. During POST I am getting an error message which reads out saying " Integrated Lights on Management is temporarily Unavailabe (1) " How to handle this problem ??
3 REPLIES
Ruslan
Trusted Contributor.

Re: How to reset ILO

Can you login via https access? Verify iLO settings pressing F8 during boot process.
acartes
Acclaimed Contributor.

Re: How to reset ILO

This sounds like the iLO is unable or unwilling to boot. I would recommend updating the iLO firmware by booting to the SmartStart firmware update CD. This will upgrade the iLO firmware and also reset the iLO processor. After that, iLO should be available.

Note that you may need to set the iLO security override switch to allow the upgrade to work.
acartes
Acclaimed Contributor.

Re: How to reset ILO

If it is still unresponsive, you may want to try resetting iLO to defaults. You can do this from the host using HPONCFG:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1017653