Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel

Change ILO ip without rebooting server

Highlighted
Mario couthino_
New Member.

Change ILO ip without rebooting server

Is it possible to change the ip for ilo without rebooting the server. telnet to the port etc.

Environment is
BL640 in a c class Chassie
4 REPLIES
barnett chan
Honored Contributor.

Re: Change ILO ip without rebooting server

Changing the network settings (and most ports) requires an iLO reset, but the server do not need to be reboot. You need to know what your new iLO ip is or your DNS needs to be working correctly.
Hope this helps.
Blazhev_1
Respected Contributor.

Re: Change ILO ip without rebooting server

hi,

login to ilo and go to the Administration tab, then to network settings and at the bottow there is a field to change the IP adress. This will reset ilo(not server) and you will have to login with the new IP after that.
HPMAN_1
New Member.

Re: Change ILO ip without rebooting server

a blade was moved from 1 enclosure to another with a different ip subnet. I am unable to login to the ilo and the ip address was statically set. How can I reset the ip for the ILO?
David Claypool
Acclaimed Contributor.

Re: Change ILO ip without rebooting server

If you have the ProLiant Support Pack loaded, you can use the HPONCFG utility from the host OS to set/change iLO's configuration.

http://www.hp.com/go/ilo --> Documents and Drivers