Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't access LO100i on DL140

Highlighted
ancarpan
Acclaimed Contributor

Can't access LO100i on DL140

I have a DL140 set up and LO100i interface is connected to the network. On the same network I have several other DL385 with iLO and iLO2.

While iLO(iLO2) interfaces come up on dhcp I can't seem to access the iLO100i interface in any way. Anyone can tell me if I'm doing something wrong?

What more on the initial boot sequence of DL385 I can hit F8 to access ilo's configuration menu where I can define a static address: is there something similar for LO100i ?

Thanks

.a.c.
1 REPLY
ancarpan
Acclaimed Contributor

Re: Can't access LO100i on DL140

I'll answer myself here: in order to guess the dhcp address of the LO100i interface I nmapped the subnet looking for addresses with open ports http and https.
This is wrong as LO100i comes only on port 80 and telnet. Once I nmapped for the correct ports I found out the address easily.
//Add this to "OnDomLoad" event