Performance Center Practitioners Forum
cancel

UNIX Resources. Cannot initialize

SOLVED
Go to solution
rpagadala09
Outstanding Contributor.

UNIX Resources. Cannot initialize

Hi Guys,

 

Even though My UNIX administrator started rstat daemon, I am still getting the below error.

 

 Monitor name: UNIX Resources. Cannot initialize the monitoring on 172.30.8.170. Error while creating the RPC client. Ensure that the machine can be connected and that it runs the rstat daemon (use rpcinfo utility for this verification). Detailed error: RPC: Failed to create RPC client.

RPC-TCP: Failed to establish RPC server address.

 

Earlier I did the load testing on QA Environment at that time when my UNIX administrator started rstat daemon for the UNIX, it worked.

 

But now the environment is the Performance cluster. So when I am trying to add the UNIX resources as monitor, I am getting the above Issue.

 

My UNIX administrator performed all the steps explained in the Controller reference guide (Chapter 25)

 Does anybody encounter the same problem?

 

Please advise me!

 

Thanks,

Raj

 

3 REPLIES
Prashanth T
Outstanding Contributor.

Re: UNIX Resources. Cannot initialize

There could be a problem with your firewall settings on the controller machine that prohibits you from monitoring the UNIX machine. Take a look at that and see if your firewall is blocking the communication.

 

Thanks

Prashanth Thimmavajjala

Suerte13cr
Micro Focus Expert

Re: UNIX Resources. Cannot initialize

You can also check this article for reference:

 

http://support.openview.hp.com/selfsolve/document/KM174027

 

Regards,

Mario.

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

LoadRunner:
http://h30499.www3.hp.com/t5/LoadRunner-Support-Customer/bd-p/loadrunner-support-customer-forum

Performance Center:
http://h30499.www3.hp.com/t5/Performance-Center-Support/bd-p/performance-center-support-customer

How to:
http://www.youtube.com/watch?v=4ChlysWupWM

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
Highlighted
rpagadala09
Outstanding Contributor.
Solution

Re: UNIX Resources. Cannot initialize

Hi All,

 

Solution :  IT opened the firewall.

 

 

Thanks,

Raj