OV Performance Management Practitioners Forum
cancel
Showing results for 
Search instead for 
Did you mean: 

HP OVPI 5.41 Interface utilization reports

SOLVED
Go to solution
HanumantMadane
Senior Member

HP OVPI 5.41 Interface utilization reports

Hi All,

 

I just wonder what is the unit of data that OVPI shows in Near Real TIme Interface Utilization report...

 

for example: "Avg In", "Avg Out" 

 

below is the example of data from report generated in CSV format:

 

Table Key Avg In Utilization (F) Avg Out Utilization (F) Avg Utilization (H) UtilThreshold Serial0/1/0 0.36 0.62   90 Serial0/1/0 0.41 0.43   90

 

Can anyone help me to identify

 

1)Unit of data

2)meaning of (F)

3) why is "Avg Utilization column(H)" empty.

 

Thanks a lot in advance!

 

Regards,

Hanumant D. Madane

 

 

 

3 REPLIES
Highlighted
m_vidyasagar
Honored Contributor
Solution

Re: HP OVPI 5.41 Interface utilization reports

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
m_vidyasagar
Honored Contributor

Re: HP OVPI 5.41 Interface utilization reports

why is "Avg Utilization column(H)" empty. >>

 

The interface is Full Duplex hence the values related to the Full Duplex are reflecting and empty value is showing for the Half Duplex Metric..

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Nick Paine
HPE Expert

Re: HP OVPI 5.41 Interface utilization reports

Average utilization is a percentage of the theoretical max utililization - octets/speed*time.

"F" and "H" refer to whether the interface is full or half duplex.

//Add this to "OnDomLoad" event