I am new to HP NA, I have installed the HP NA in our development setup. Now I want to add a new device in it.
Can anyone tell me the prerequisite and procedure to add the device in HP NA.
Hello Amit ,
When adding new devices into the inventory (manually or automatically when synchronizing with NNMi inventory), HPNA automatically discovers device information.
The method to manually add devices is as follow :
Connect to HPNA web console with an administrator account.
Select the menu Devices à New device wizard to add a new device.
1-fill in device IP or hostname and optionally a comment.
2-Decide to use network-wide password rules or to specify specific connection parameters. Specific password
3-Decide if HPNA will automatically add its IP (or another) as a SysLog destination on the newly discovered device.
When discovery finishes, a congratulation window open.
If there was no connection problem, verify that device configuration was correctly downloaded using link View new configuration.
Let me know if it answers the Questions .
Thanks for the reply.
Just want to know that, what are the prerequisite(For Ex. required ports between HPNA and device or access of the device) for the device getting added into HPNA.
There is a section on ports, in the NA 9.22 Admin Guide, page 68:
Also in the NA 9.22 User Guide, there is a section on Adding Devices, page 116:
Let us know if you need more details.
u can check this guide for NMC port Reference Details .
For NA check page 60