Data Protector Practitioners Forum
cancel

AUTOLOADER AND OMNIBACK II VER.3.10

SOLVED
Go to solution
Highlighted
Antonio de Greg
New Member.

AUTOLOADER AND OMNIBACK II VER.3.10

THE HP-UX 11.00 SYSTEM RECOGNIZE THE ROBOTICS OF A DAT 24X6 (C6366A) AS AN AUTOCHANGER AND NOT FUNCTIONING WITH OMNIBACK
IN THE KERNEL I HAVE INSTALLED THE spt and sctl SCSI PASS-TROUGHT.
3 REPLIES
Brian M. Fisher
Respected Contributor.

Re: AUTOLOADER AND OMNIBACK II VER.3.10

Document A4918893 contains the information for configuring an AutoLoader:
http://us-support.external.hp.com/cki/bin/doc.pl

The steps that still are required:
1) Add driver line to /stand/system
i.e. driver spt
2) Create new kernel
3) Create robotics device file

Brian
<*(((>< er
Perception IS Reality
Anthony Gooneti
Super Contributor.
Solution

Re: AUTOLOADER AND OMNIBACK II VER.3.10

you might also want to use /opt/omni/lbin/uma to test the robotics device before you start using omniback.

i.e

./uma -ioctl /dev/robotic_device_file

>> stat D
Minimum effort maximum output!
alberto vasquez
Respected Contributor.

Re: AUTOLOADER AND OMNIBACK II VER.3.10

See appendix B. of the Omniback II version 3.1 Installation and Licensing guide. You can view or download the manual (which is in
PDF format) from the website ...

www.openview.hp.com

->Library ->product Manuals

Within Appendix B is the section entitled
"SCSI Pass-Through Driver Configuration"
which should address your needs.

-Tim Lovejoy - HP Omniback Support Team