Application Perf Mgmt (BAC / BSM) Practitioners Forum
cancel

Cannot capture SNMP Trap from Infoblox in HP Openview

Wang,MinJie
Super Collector

Cannot capture SNMP Trap from Infoblox in HP Openview

Greeting,

 

I'm trying to capture some snmptraps sent from Infoblox. Below is my configuration in text format:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

CONDITION
$e ".1.3.6.1.4.1.7779.3.1.1.1.1"
$G 6
$S 2
$2 "3"
SET
SEVERITY Major
MSGGRP "ESM-Only"
OBJECT "DNS:Infoblox"
CUSTOM "CaseNumber" "_"
TEXT "<$6>"

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Below is the Original message for that trap:

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Generic: 6; Specific: 2; Enterprise: .1.3.6.1.4.1.7779.3.1.1.1.1;
Variables:

[1] .1.3.6.1.4.1.7779.3.1.1.1.2.1.0 (OctetString): 172.29.104.175
[2] .1.3.6.1.4.1.7779.3.1.1.1.2.2.0 (Integer): 3
[3] .1.3.6.1.4.1.7779.3.1.1.1.2.5.0 (OctetString): Login
[4] .1.3.6.1.4.1.7779.3.1.1.1.2.4.0 (Integer): 59
[5] .1.3.6.1.4.1.7779.3.1.1.1.2.11.0 (OctetString): A Serial Console login failure has occurred

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

 

Unfortunately it's always displayed as "Unmatched". Please advise further.

 

Thank you!

Jay

2 REPLIES
David Campeau
Honored Contributor

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

Is this for HPOM or SiteScope? I ask because this particular formum is more geared to SiteScope/BAC/BSM.

 

Thanks,

 

David

Highlighted
Wang,MinJie
Super Collector

Re: Cannot capture SNMP Trap from Infoblox in HP Openview

HPOM. Thanks.

 

//Add this to "OnDomLoad" event